Difference between revisions of "Debugging after a run crashes"

From ccrmwiki
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
The best way to find out the reason for a crash is to visualize the surface velocity with ACE/xmvis6. Usually you'll see some large/noisy velocity somewhere, which may give you some hints on forcing etc.
 
The best way to find out the reason for a crash is to visualize the surface velocity with ACE/xmvis6. Usually you'll see some large/noisy velocity somewhere, which may give you some hints on forcing etc.
  
−
Sometimes you want to visualize the problem right before the crash. Here is the way using the hotstart option.
+
Sometimes you want to visualize the problem right before the crash. You cannot use autocombine_MPI_elfe.pl as the last stack of output is incomplete. But you can use the core FORTRAN combine script (e.g., combine_output6) to directly combine an incomplete stack. Just follow the instruction in the header of combine_output6.f90 to prepare the inputs and run. Then visualize the combined outputs with xmvis6.
−
 
 
−
Suppose you run crashed at time step it=1005 (you can find out this in mirror.out), and the closest hotstart output (in outputs) has a step of 900. First save any outputs that may be overwritten upon ihot=2:
 
−
 
 
−
mv mirror.out mirror.out.0
 
−
mv hotstart.in hotstart.in.0
 
−
mv outputs outputs.0
 
−
mkdir outputs
 
−
....
 
−
 
 
−
The 2nd move is necessary as we are going to change the stack size (ihfskip).
 
−
 
 
−
First, combine hotstart outputs at it=900 using combine_hotstart*.f90 to generate a new hotstart.in, and then move it to the same dir as hgrid.gr3.
 
−
Then set ihot=2 in param.in. Also set nspool and ihfskip, and hotout_write to 1005. Start the run with same number of CPUs. Occasionally, the hotstarted run will crash at a different step, say 1006, and if this is the case, reset nspool and ihfskip, and hotout_write to 1006 and redo it. The 2nd time should work.
 
−
 
 
−
You'll see 2 stacks coming out after the crash. Combine the 1st stack and then viz.
 

Latest revision as of 10:43, 30 June 2014

The best way to find out the reason for a crash is to visualize the surface velocity with ACE/xmvis6. Usually you'll see some large/noisy velocity somewhere, which may give you some hints on forcing etc.

Sometimes you want to visualize the problem right before the crash. You cannot use autocombine_MPI_elfe.pl as the last stack of output is incomplete. But you can use the core FORTRAN combine script (e.g., combine_output6) to directly combine an incomplete stack. Just follow the instruction in the header of combine_output6.f90 to prepare the inputs and run. Then visualize the combined outputs with xmvis6.

Retrieved from "http://ccrm.vims.edu/w/index.php?title=Debugging_after_a_run_crashes&oldid=765"